FAQ-Product
The spring cross and guide deliver a consistent, centred closing behaviour and better flow values.
Yes, but it must be ensured that the installed springs in the disco check valves are subject to a certain tolerance and that the specified opening pressures cannot be realized exactly. Conversely, a tightness is only given in the presence of a certain back pressure. The specified leak rate must also be observed.
If pressure circumstances are unstable, discs in check valves tend to become tilted –the guide used in the RV02 series prevents this from happening.
Special opening pressures are possible by making design modifications to the RV02 series (spring tolerance +/-5%). View our check valves here.
For vacuum applications with type RV02, it is advisable to glue the seals if necessary.
We can do this ex works for an extra charge, but it is also possible to do yourself – Loctite 480 is used as the adhesive here.
The seal of the disco check valves type RV01 has a Shore hardness of 70.
We base the leak test on the DIN EN 12266 standard. This defines the maximum permitted leakage in mm³/s, which may occur during the minimum test period depending on the nominal diameter and leak rate. This table is also available, converted into air bubbles, see picture down below. For the metallic sealing fittings, we specify leak rate G.
There for you
Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.
You can reach us from Monday to Friday at +497143 9666900 and any time at sales@nieruf.com
Quality
Our certified quality management according to DIN EN ISO 9001: 2015 is part of our DNA. With our test stands we can carry out pressure tests with up to 350 bar with air and water as well as leak tests according to DIN EN 122661.
This is NieRuf
Committed
Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.
Motivated
We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.
Competently
Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.
Flexible
We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.
Contact 
Resistance check 
Frequently asked questions 
Configurator 
