3/2-solenoid valve output: G 1/8" Inch input: G 1/8" inch plastic polyamid 24V DC NC - normally closed direct acting pressure air -0,9 - 10 bar
design:
directly controlled three port solenoid valve with two outputs
voltage:
24V DC
max. pressure:
-0,9 - 10 bar
diameter:
DN6
function:
NC - normally closed
3/2-solenoid valve output: G 1/8" Inch input: G 1/8" inch plastic polyamid 230V AC NC - normally closed direct acting pressure air -0,9 - 10 bar
design:
directly controlled three port solenoid valve with two outputs
voltage:
230V AC
max. pressure:
-0,9 - 10 bar
diameter:
DN6
function:
NC - normally closed
3/2-solenoid valve output: G 1/8" Inch input: 6mm plug plastic polyamid 24V DC NC - normally closed direct acting pressure air -0,9 - 10 bar
design:
directly controlled three port solenoid valve with two outputs
voltage:
24V DC
max. pressure:
-0,9 - 10 bar
diameter:
DN6
function:
NC - normally closed
2/2 Ways Solenoid valve G 1/4" Inch DN4,0 made of PTFE seal FKM direct acting nominal voltage 24V DC pressure 0 - 3,2 bar
design:
seat valve with membrane
voltage:
24V DC
max. pressure:
0 - 3,2 bar
diameter:
DN4,0
function:
NC - normally closed
3/2-solenoid valve output: G 1/4" Inch input: G 1/8" inch plastic polyamid 24V DC NC - normally closed direct acting pressure air 0 - 10 bar
design:
directly controlled three port solenoid valve with two outputs
voltage:
24V DC
max. pressure:
0 - 10 bar
diameter:
DN8
function:
NC - normally closed
2/2 Ways Solenoid valve G 1/8" inch DN1,5 made of PVC seal EPDM direct acting nominal voltage 24V DC pressure 0 - 4 bar
design:
seat valve with membrane
voltage:
24V DC
max. pressure:
0 - 4 bar
diameter:
DN1,5
function:
NC - normally closed
2/2 Ways Solenoid valve G 3/4" Zoll DN20 made of PTFE seal FKM pilot operated nominal voltage 230V 50Hz pressure 0,3 - 6 bar
design:
seat valve with membrane
voltage:
230V 50Hz
max. pressure:
0,3 - 6 bar
diameter:
DN20
function:
NC - normally closed
2/2 Ways Solenoid valve G 2" Zoll DN50 made of PTFE seal FKM pilot operated nominal voltage 24V DC pressure 0,3 - 6 bar
design:
seat valve with membrane
voltage:
24V DC
max. pressure:
0,3 - 6 bar
diameter:
DN50
function:
NC - normally closed
Plastic-solenoid-valves made of PP, PVDF, PTFE or PVC
Plastic solenoid-valves can be manufactured from four different materials: PVC, PP, PVDF and PTFE.
PVC-solenoid-valve
PVC solenoid-valves are made of polyvinyl chloride and are characterized by an impressive durability. They are often used with chlorinated media, e.g. in pool construction.
PP-solenoid-valve
PP solenoid-valves are made of polypropylene and are characterized by a very good thermal resistance. PP is a plastic often used in industry. Usually, solenoid valves made of PP are used in pharmaceutical and food industry.
PVDF-solenoid-valve
PVDF solenoid-valves are made of polyvinylidene fluoride. Polyvinylidene fluoride is characterized by a good chemical resistance. Also it is very sterile. Thus PVDF solenoid valves are often used in medical technology and in biochemical processes.
PTFE-solenoid-valve
PTFE is commonly used to manufacture seals. But it is also an ideal component in PTFE solenoid-valves. PTFE stands for polytetrafluoroethylene, which is non-flammable and non-adhesive. Also, it withstands nearly all acids and bases. That's why PTFE solenoid valves are often used in chemical industry.
Buy plastic-solenoid-valves at low cost
Buy plastic solenoid-valves rapidly and easily in our online shop. If you need any help choosing the right valve, please do not hesitate to contact our team by mail or phone. All we need is a brief description of your application, the medium, the voltage and the pressure range within the pipeline. Also, please provide the temperature of the medium and the surrounding. We will then determine which plastic solenoid valve suits your needs and provide your with a free individual offer.
There for you
Special requests, spare parts or a quick support? Our staff will answer your questions and concerns immediately.
You can reach us from Monday to Friday at +497143 9666900 and any time at sales@nieruf.com
Quality
Our certified quality management according to DIN EN ISO 9001: 2015 is part of our DNA. With our test stands we can carry out pressure tests with up to 350 bar with air and water as well as leak tests according to DIN EN 122661.
This is NieRuf
Committed
Commitment engenders trust. We stand by our word and are convinced that as a result not only our customers but also everyone we work with can rely on us.
Motivated
We always strive to find the best solution for our customers. It is our goal and incentive to have completely satisfied customers.
Competently
Technical and commercial expertise form the basis for developing qualified solutions tailored precisely to the needs of our customers.
Flexible
We do not adhere to rigid guidelines but instead focus on the individual wishes and needs of our customers. They are more important to us than internal company processes.
Contact 
Resistance check 
Frequently asked questions 
Configurator 